|
BALLAST FOR
UV-PROCESS / CURING LAMP.
UV – Process / Curing
Lamp is a electric discharge lamp have a negative resistance
characteristic which causes them to draw an increasing amount of
current leading to immediate destruction if operated directly from
the power line.
Ballast is a device
designed to deliver proper voltage and current to start and regulate
the electric discharge lamp for it efficient use and life.
Hi - Po has specialized in
the manufacture of the custom base ballast for the high rating
electric discharge lamp. These are designed and manufactured to meet
not only customer specification, but also our own standard of
workmanship and performance. Such ballast are available for the lamp
ranging from 2KW to 19KW. Our ballast is short-circuit protected, the
output current is limited to the maximum lamp current in any
eventuality
Hi - Po manufacture below
mentioned core and coil type Ballast.
Constant Wattage
Isolation ( CWI ) Ballast.
Our core and coil type
ballast is open type design and mounted inside the panel board of the
equipment.
It consist of two or three
copper wire wound coil fitted on the electrical grade steel
lamination. Ballast is vacuum impregnated in varnish for hum free
operation and long life. We use copper wire with class
insulation and adhere to IS 13730 specification.
We use dry type capacitor
as per IS 2993 with sufficient voltage safety.
We also make Bi-level
ballast as per customer requirement.
Salient Feature:
Suitable for variety
of power density rating of lamp, i.e. 100W/inch to 400W/inch.
Constant wattage
design for stable operation, Lamp output wattage is maintain within
5% for the input variation of up to about 20%.
Switchable capacitor
bank to lower the lamp power to about 50% to increase the lamp life.
(Optional)
Several voltage taps
on primary and secondary side to compensate the effect of lamp
degradation.
All termination on
the ballast with proper terminal block, with proper marking for ease
of wiring and safety.
High quality low loss
grain-oriented core material for higher efficiency.
High power factor for
combination of ballast, capacitor and lamp.
Can be used with
various lamp sources like Philips, Western Quartz, Primearc,
Theimer, Superior Quartz, Hanovia etc.
|
